I had previously made a cedar grid fence for a client, and they asked me to create a smaller version for the front of their property. These bundles are the milled cedar ready to be shaped into the individual grid pieces. 

I assembled the grids taller than they needed to be and then trimmed the bottom off to match the grade of the property. We took elevations on the property at the locations for each panel and used this information to calculate the necessary angle for the bottom of the panels. 

One of the assembled panels with the angled lower rail complete. 

All the panels laid out end to end on my driveway to check their alignment.

Installation day with a lot of help from the guys at Doyle McDonnell, Inc. 

Completed fence on the left side of the driveway.

A single panel on the right side of the driveway ends into an existing garden bed.